BS6708 Type 307 Mining Cable - EPR, CP - 25mm to 150mm
Conductor: Electrolytic, stranded, tinned copper wire IEC 60228 Class 5
Insulation: Ethylene propylene rubber (EPR) Ground core is not insulated
Seperator: Coloured Textile tape for core identification
Screen: Tinned copper / Nylon braided screen over phase cores. Pilot core is not screened.
Layup: All cores are laid up in contact with the bare copper earth conductor
Bedding: Rubber based bedding compound
Outer Sheath: Heavy duty chloroprene outer sheath
Voltage Rating: 1900V to 3300V
Temperature Limits: Fixed: -20°C to +85°C
Should not be installed at temperatures below 5°C or above 60°C
Minimum Bending Radius: As per cable manufacturer datasheet